Share
Print
|
|
|
|
|
CONSINEX - Consignment Inventory Auto Purchase / By Unit Used Only
Consignment Inventory Auto Purchase / By Unit Used Only
Affected Window: w_inventory_transaction_manual_issue
Note: For this switch to function, Switch 
CONSINED (Consignment Inventory Auto Purchase) must be set to Yes.
Switch Set to Yes:
When set to Yes, when a consigned expendable part is issued and the part is one of several included in a batch, a Journal Entry will be created only for the issued part(s), not for the entire quantity of the batch. The Journal Entry will be an individual record, unassociated with the original batch.
In the example below, consumable parts were purchased.
A Manual Issue 
was performed for some of the parts out of the original batch.
A soft warning dialog populates. Select the appropriate response and submit the transaction.
The system automatically opens and closes a Purchase Order for the quantity issued.
The parts were converted from the consignment.
A G/L Interface Journal Entry was created for the individual parts with a total cost.
Switch Set to No:
When set to No, when a consigned expendable part is issued and the part is one of several included in a batch, a Journal Entry will be created for the entire batch, not only for the issued part(s).
For example, consumable parts were purchased. A Manual Issue was then performed for some of the parts out of the original batch.
A soft warning dialog populates. Select the appropriate response and submit the transaction.
The system automatically generates and closes a Purchase Order for the entire batch, even though the manual issue was for a lessor quantity.
After the issue, a G/L Interface Journal Entry was created for the entire batch of parts with a total cost.
Share
Print
|
©1997-2024 Trax USA Corp. All rights reserved. This manual may not be copied, photocopied, reproduced, translated, or converted to any electronic or machine-readable form, in whole or in part, without prior written approval from Trax USA Corp. |
 |