Share
Print
|
|
|
|
|
Engineering 7.0
Engineering Module |
|
|
|
7.0 |
Select the A/C Control button within Engineering Control for a specific E/C to populate the list of aircraft with effectivity to the E/C. the List populates with options to assign aircraft as Applicable, Not Applicable or an option to Issue to (alternative effectivity for line numbers not to be assigned effectivity to the E/C). The Applicable option is updated to provide links Engineering Control panels to update and/or override E/C Range Effectivity, Status, Warranty Range and Scheduling controls. |
|
|
7.0 |
Select the Audit button to view the Task Card history and a list of all changes made against the Task Card. The tree-like view allows the user to expand and collapse each record per transaction. This window allows the user to print and email the results of the audit. |
|
|
7.0 |
Select the Audit button to view the Task Card history and a list of all changes made against the Task Card. The tree-like view allows the user to expand and collapse each record per transaction. This window allows the user to print and email the results of the audit. |
|
|
7.0 |
Select the Audit button to prompt a window that displays all changes made to the record. Users can expand and collapse the records to their liking. Additionally, this window allows users to print and email its content. |
|
|
7.0 |
The Effectivity |
|
|
7.0 |
Associated Template - This field contains a selection of Templates that can be used in conjunction with the E/C. |
|
|
7.0 |
Associated Template - This field contains a selection of Templates that can be used in conjunction with the E/C. |
|
|
7.0 |
Next Ground OP checkbox - Select this checkbox to signify if a future ground operation is necessary. Selecting this option will make the Ground Time Required field mandatory. |
7.0 |
Ground Time Required - The amount of hours required for the next ground operation. |
|
|
7.0 |
Note: Child E/Cs can be called onto more than one work order. |
|
Engineering Control Authorization, Schedule Controlled By Tab |
7.0 |
Note: Child E/Cs can be called onto more than one work order. |
|
|
7.0 |
Min Yield % - The Min Yield % field is used to make planners more effective so as not to perform an E/C too early. For example, if an E/C has a schedule of 100 days with a Min Yield % of 90% when the E/C has accumulated 90 days of actual time (usage from the last compliance) the planner will be flagged in Planning via the Due Date/Min Yield Date. Note: The Warning % Due field has been renamed the Min Yield % field. Note: The Min Yield % is used when calculating the Min Yield Date of the E/C in the Planning Control app. |
7.0 |
Next Ground OP checkbox - Select this checkbox to signify if a future ground operation is necessary. Selecting this option will make the Ground Time Required field mandatory. |
7.0 |
Ground Time Required - The amount of hours required for the next ground operation. |
7.0 |
Max Yield % - The Max Yield Percentage in planning calculates a date the planners do not want to surpass based on the max percentage from Engineering (even though this date is not technically the E/C’s Due Date). For example, if an E/C has a schedule of 100 days with a Max Yield of 95% when the E/C has accumulated 95 days of actual time (usage from the last compliance) the planner will be flagged in Planning via the Max Yield Date. |
|
|
7.0 |
Note: Child E/Cs can be called onto more than one work order. |
|
|
7.0 |
Note: Child E/Cs can be called onto more than one work order. |
|
|
7.0 |
Note: Once an Aircraft is selected for a report, the Company field auto-populates the company to which the aircraft is assigned. |
7.0 |
Note: The Compliance Status Report has been added to eMRO. |
7.0 |
Note: The Engineering Control Evaluation print has been added to eMRO. |
7.0 |
|
|
The Import Link E/C with T/C button |
7.0 |
|
|
The Import T/C Items |
7.0 |
|
|
The Import Task Cards |
|
Mass Authorize Pending TCs Button, via Task Card Authorization |
7.0 |
Process Queue - When a T/C Mass authorization is prompted into the system, the transaction will be processed via the Print Queue window. Users can continue using the platform while the changes made are saved in the background. The progress can be monitored in the Print queue window and will display in three stages: In Progress, Completed, or Failed. |
7.0 |
|
|
The Attachments tab is used to attach images, documents, web links, and TraxDoc references to a record. Once the Task Card Express record is saved, users can view attachments against the Task Card. |
|
|
7.0 |
Note: The system will display Keyword suggestions based on the characters entered in the field. |
|
|
7.0 |
The Manual tab is used to associate any maintenance manuals that may be required to carry out the work. Other documents, such as drawings, can also be listed. The system can produce a list of all the documents required once a Work Order has been created. |
|
|
7.0 |
P/N - The following functionality has been added to this field: Note: The system will display P/N suggestions based on the characters entered in the field. |
|
|
7.0 |
Note: The system will auto populate the A/C Type/Series fields with the values associated with the selected Zone code. However, if the Zone code has more than one A/C Type/Series associated with it, then the fields will remain blank. |
7.0 |
|
|
The Survey tab allows user to set up survey questions against a Task Card. These questions can be configured as optional or mandatory. If mandatory, once the Task Card is attached to a Work Order, the Task Card can not be closed until the survey question is answered. |
|
|
7.0 |
Note: The system will auto populate the A/C Type/Series fields with the values associated with the selected Zone code. However, if the Zone code has more than one A/C Type/Series associated with it, then the fields will remain blank. |
7.0 |
|
|
The Range Import |
|
|
7.0 |
Note: From Version 7 and onward, the Maintenance Manual |
|
|
7.0 |
Note: The Task Card Express button has been added to the Task Card Authorization Explorer window. For more information, refer to the Task Card Express button via Task Card Selection. |
|
|
7.0 |
Note: The system will display Keyword suggestions based on the characters entered in the field. |
|
|
7.0 |
Fuel Tanks - The following functionality has been added to this field: Refueled - The fuel tanks has been refueled. |
|
Task Card Express Button, via Task Card Authorization Explorer |
7.0 |
The Task Card Express |
|
|
7.0 |
T/C Phase - The W/O Phase associated with the Task Card. Select this field to choose from a list of phases currently available in the system, via Drop Down Selection window. Note: Phases are set up via the 'Task Card Phase' transaction code. Users can add, remove, or otherwise edit records available within this transaction code. |
|
|
7.0 |
Note: The Task Cards by Revision No. print has been added to eMRO. |
|
T/C Quick Reference Section |
7.0 |
P/N - The following functionality has been added to this field: Note: The system will display P/N suggestions based on the characters entered in the field. |
7.0 |
STK UOM - The Stock Unit of Measure (UOM) setup for the Part Number (P/N) assigned to the Task Card. |
|
|
7.0 |
The Compare button allows users to compare any past Task Card Revision to the current Revision of a Task Card. The Task Card comparison will only display the changes between Revisions and ignore data that remained the same. The Revision comparison will reveal all changes at the T/C header level including material requirements and Task Card Effectivity. |
|
|
7.0 |
The View button allows users to see a past Revision of the Task Card in a query view. |
|
|
7.0 |
Note: The Task Card Express button has been added to the Task Card Supervisor window. |
Engineering Switches |
|
|
|
7.0 |
When set to Yes, if the Attachment |
Engineering Transaction Codes |
|
|
|
7.0 |
E/C Must Contain Task Cards checkbox - When selected, an Engineering Control using this E/C Category cannot be be released for authorization if it is not linked to any Task Cards. From the Engineering Control Management window, when the Release for Authorization |
7.0 |
ROS Classification Code - The ROS Classification Code. M (Mandatory) - When the Classification Code is 'M', whether the RO Control checkbox is selected or deselected, the user may not edit this Code. O (Optional) - When the Classification Code 'O' is selected, the user may change the code from the drop down menu. If the user deselects the RO Control checkbox, the ROS Classification Code becomes null or blank. D (Improvements) - When the Classification Code 'D' is selected, the user may change the code from the drop down menu. If the user deselects the RO Control checkbox, the ROS Classification Code becomes null or blank. R (Recommended) - When the Classification Code 'R' is selected, the user may change the code from the drop down menu. If the user deselects the RO Control checkbox, the ROS Classification Code becomes null or blank. |
button allows users to define A/C effectivity for documents attached to a Task Card. The system will limit attached files to only those aircraft with effectivity to the attachment.
allows users to link E/Cs and T/Cs at the Task Card level using the appropriate .xslx file.
button allows users to mass import items to a desired Task Card using the appropriate .xslx file format.
button is used to mass import effectivity to the E/C via a .xsl file. This button can be used to import A/C or P/N effectivity depending on the window it is accessed (i.e A/C imports via the A/C E/C Effectivity window and P/N imports via the P/N E/C Effectivity window).
button, Attachment 
button, and Survey button 
have been moved from the Sub-Function menu and are now available in the Task Card Window's Option bar.
button allows users to view and edit existing Engineering Task Cards quickly and efficiently. The Task Card Express window is a slimmed down version of the 
button is selected, a warning stating 'E/C contains no Task Cards' will prevent the E/C from being released.Topic updated: 1/9/2024 3:22:50 PM
Share
Print
|
©1997-2024 Trax USA Corp. All rights reserved. This manual may not be copied, photocopied, reproduced, translated, or converted to any electronic or machine-readable form, in whole or in part, without prior written approval from Trax USA Corp. |
 |