MANUALS > Engineering > Engineering Module - T/C > Engineering - T/C, Update Menu > Task Card Selection > Task Card Selection Buttons > New Task Card Express Button, via Task Card Selection > New Task Card Express Button, Zones Tab

Users can add or remove the specific work zones for the Task Card in the Zones tab.

Note: The system will auto populate the A/C Type/Series fields with the values associated with the selected Zone code. However, if the Zone code has more than one A/C Type/Series associated with it, then the fields will remain blank.

The following information/options are available in this window:
_____________________________________________________________________________________

New Record button

Select this button to add a new line item to the section.

Delete Record button

Delete the selected line item entry.

Zone

The Zone area for the Non-Routine Task Card (selected from Task Card Control Master).

Note: When a Zone is selected in the Zones tab, the A/C Type and A/C Series fields will auto-populate based on the Task Card's Control field.

Description

The Zone description for the Non-Routine Task Card.

Item

The specific item number on the Non-Routine Task Card that this record is to be associated with. Leave default '0' to have this record associated with all item numbers on the N/R Task Card.

A/C Type/Series

The Aircraft Type and Series/Fleet assignment.

_____________________________________________________________________________________