EFFLOADATREC - Control Effectivity Application According To Load At Receiving Status

MANUALS > Engineering > Engineering Switches > EFFLOADATREC - Control Effectivity Application According To Load At Receiving Status

EFFLOADATREC - Control Effectivity Application According To Load At Receiving Status

Control Effectivity Application According To Load At Receiving Status

Affected windows: w_manufacturer_data_import

EFFLOADATREC1

Switch Set to Yes:

When set to Yes, during the Manufacturer Data Import process, the system will apply effectivity to a serial number according to the status of the Load At Receiving checkbox.

eMRO_Engineering_Yes

The .txt file has been created as shown below:

Select the Load At Receiving checkbox:

Load the AC Readiness file and begin the import:

The serial number is loaded with effectivity:

The following serial number will be loaded:

Deselect the Load At Receiving checkbox:

Load the AC Readiness file and begin the import.

The serial number is loaded without effectivity:

Switch Set to No:

When set to No, during the Manufacturer Data Import process, the system will apply effectivity to a serial number regardless of the status of the Load At Receiving checkbox.

eMRO_Engineering_No

The following Serial Number will be loaded via the AC Readiness import:

The Load At receiving checkbox is deselected:

Load the AC Readiness file and begin the import:

The serial number was loaded with effectivity even though the Load At Receiving checkbox was deselected:

See Also

Engineering Switches

ADCOMPOPT - Display AD Component Text and AD Not Effective Checkboxes

ADDCONT - Add E/C Content Automatically

ADDSTENGRANGE - Status And Reason Field Added To The Engineering Control Window

ADEFFATCLDI - Avoid Removal of TC Effectivity When an Item is Deleted

AHPDFEMBED - Embedding PDF Attachments in Task Card Prints

AOVERRWOECTC - Auto Override Revised EC/TC In Open Work Orders That Have Not Yet Been Printed

ATACHPSCTMANDATORY - Task Card Mandatory ATA Chapter and Section

AUTOECPNACTUAL - Automatically Update Actual Hours/Cycles on P/N S/Ns Effective to P/N E/C

AUTORESCHWOCAT - Automatically Create W/O with W/O Category via Auto-Reschedule E/C

AVOIDRATCHOLD - Cannot Release Task Cards in Hold Status For Authorization

CHKPNMOD - Warning when NLA Modify To is not Part of the NHA

CHOMITEC - Characters to Omit in E/C

CHOMITTC - Characters to Omit in T/C

COMPLIEDNA - Compliance Written for Complied With Controlled E/Cs with a N/A Status

DCACEFFT - Enables the Effectivity button in the Attachment Control

DEFCUS - Default Customer Value For Task Card References

DONTPRINTTEXT - Do not print T/C Item text when the T/C has a TraxDoc Reference

ECATACHAPSECTMANDAT - Make Chapter and Section fields Mandatory

ECAUTH - E/C Authorization

ECAUTHPROT - Unauthorized Engineering Control fields Protected

ECAUTO - E/C Auto Creation

ECBLANKCLASSIF - E/C Classification field blank by default when creating a new E/C

ECCONTSORT - E/C Content Sort Order

ECEFFCONTROLPNAC - E/C Cannot Have Both P/N and A/C Effectivity

ECEFFTEXT - E/C Effectivity (APPLICABILITY) Code

ECEXPEMD - Make Expenditure field in E/C Mandatory

ECINTREV - Enter Revision and Revision Description on E/C Creation

ECMNLDUP - Disable E/C Affected Manual Duplicate Checks

ECNEWUPDATE - Update E/C To Be Activated

ECRENAME - E/C Rename

ECRESTRICTVENDOR - Restrict E/Cs to Specific Repair Order Vendors

ECSMPER - E/C Authorization Allowed By Creator

ECSUBCATEGORY - Make E/C Sub Category field Mandatory

ECTCLINK - Security Control to the New, Save, and Delete Buttons to Modify EC/TC Links

ECVIAREV - E/C Update Only Via Revision

ENFORCERANGETYPE - Enforce Range Rules

ENGDFALL - Engineering Selection Window, Status Default to All

FOLLOWGRB - Track E/C Through GRB (Goods Received Batch)

LDPNWOPOS - A/C Readiness will Load P/Ns Without A/C Positions

LOCSITEALLOWED - Display Task Card, Allowed Locations Tab

LOCSITEHIDE - Hide Site field in the Allowed Locations and Location/Site Ban Tabs

MAJORREPAIRMAN - Make the Major Repair Mandatory in Engineering, Production, Shop, and Technical Records

MANLLOR - Disable Lower Level and Override checkboxes if E/C is Mandatory

MLTSKTC - Auto Populate Skill According to Previously Selected Skills

MPDLNROE - Override Effectivity in MPD Loader

NOSELECTEFFECTIVITY - Cannot Select to Override Effectivity for P/N and A/C Engineering Controls

ONWINGTASK - Do Not Allow User TO Edit Reset Date For Onwing P/N E/Cs

PENDAUTH - WO EC & TC Revision Override

PREIFECCOMPL - Prevent User From Removing Effectivity When EC Has Compliance History

RANGEHELPER - Display the Individual A/C Selection Button

REVAUTH - Task Card Authorization Revision

RINCONTROL - RIN Control

RMVRVBAR - Remove Revision Bar

RPTSCHDMAND - Make the E/C Repeat Schedule Mandatory

SAVEASEC - Save As Prompt Box for Old E/C Effectivity

SSCONT - Stylesheet Content Sequence Number

SUPERECCANCEL - Auto Cancel E/Cs That Have Been Superseded By A Date

TASKCARD - Task Card Footer

TC/CTL - Task Card Control Master Edit

TCAREAMD - Make Area field in Task Card and Work Order Task Card Mandatory

TCAREAMDNR - Make Area field in W/O Non Routine Task Card Mandatory

TCASDEF - Task Card Instead of E/C as the Default E/C Type

TCAUTHPROT - Unauthorized Task Card fields Protected

TCCTLSHT - Task Card Control Sheet Footer

TCDISCAUTH - Enable Authorization Process for Engineering Request

TCEFFECT - A/C Effectivity At Task Card Level

TCITMEFF - Task Card Item Effectivity

TCITMEFO - Task Card Item Not Effective

TCMANSHP - Optional Man Hours on Shop Task Card

TCMSMAN - Make Main Skill Mandatory for Task Card Items

TCOPTMAN - Make Man Hours and Men Required fields Mandatory

TCPNNOTREV - Allow User to Update Task Card P/N Window

TCPREDRW - Task Card Pre-Draw Print After Each Task Card

TCPREPRT - Store Task Card as PDF/Word

TCQUICKRES - Task Card Quick Resolution Available

TCREFEX - Task Card Reference Exclusions

TCSEDIT - Task Card Shop Item Editor

TCSMPER - Task Card Allow Authorization By Same Person Who Issued It

TCTMAND - Task Card Type Mandatory

TCVIAREV - Task Card Update Only Via Revision

TCWEIBAL - Show the Weight and Balance Button

TCXMLENCODING - Use UTF-8 Encoding for Task Card XML

UPDATESWCOMPLEC - Disable Auto Upload of P/N Software Configuration at E/C Compliance