Field

Function

Config Other

The Config Other field is used to configure how the Planning will calculate the Due Date. If the Config Other field is Null, or if FLTSCD is entered, the Planning will calculate the Due Date by using the Flight Schedule. If Mean Hour are entered in the Config Other field, the Planning will calculate the Due Date by using the Mean Hours for that A/C.

Run Using Flight Schedule

Select the Run Using Flight Schedule checkbox to query for elements by Flight Schedule.

7 Days Forecast Parameters

Function

Config Number

The Config Number is used to determine the refresh interval of the Planning Forecast. In the above example, the refresh interval is 45 minutes.

Min Hrs Red Indicator

Enter the minimum number of flight hours for an aircraft to appear in the Seven Day Forecast parameters.

For example, any aircraft that have accumulated less than 5 hours of flight time will appear in red. However, any aircraft that have accumulated 5 or more hours of flight time will appear in yellow. This number is specified in the Configuration tab of the switch PLNAUTO7D and can be updated at any time.

For additional information, refer to the Seven Day Forecast via the A/C Planning Query of the Planning Training Manual.

Max Hrs Green Indicator

Enter the maximum number of flight hours for an aircraft to appear in the Seven Day Forecast parameters.

For example, any aircraft that have accumulated 20 or more hours of flight time will appear in green. However, any aircraft that has accumulated less than 20 hours of flight time will appear in yellow. This number is specified in the Configuration tab of the switch PLNAUTO7D and can be updated at any time.

For additional information, refer to the Seven Day Forecast via the A/C Planning Query of the Planning Training Manual.

Min Cyl Red Indicator

Enter the minimum number of flight cycles for an aircraft to appear in the Seven Day Forecast parameters.

For example, any aircraft that have accumulated less than 3 cycles of flight time will appear in red. However, any aircraft that have accumulated 3 or more cycles of flight time will appear in yellow. This number is specified in the Configuration tab of the switch PLNAUTO7D and can be updated at any time.

For additional information, refer to the Seven Day Forecast via the A/C Planning Query of the Planning Training Manual.

Max Cyl Green Indicator

Enter the maximum number of flight cycles for an aircraft to appear in the Seven Day Forecast parameters.

For example, any aircraft that have accumulated 10 or more cycles of flight time will appear in green. However, any aircraft that has accumulated less than 10 cycles of flight time will appear in yellow. This number is specified in the Configuration tab of the switch PLNAUTO7D and can be updated at any time.

For additional information, refer to the Seven Day Forecast via the A/C Planning Query of the Planning Training Manual.

Min Day Red Indicator

Enter the minimum number of flight days for an aircraft to appear in the Seven Day Forecast parameters.

For example, any aircraft that have accumulated less than 1 day of flight time will appear in red. However, any aircraft that have accumulated 1 or more days of flight time will appear in yellow. This number is specified in the Configuration tab of the switch PLNAUTO7D and can be updated at any time.

For additional information, refer to the Seven Day Forecast via the A/C Planning Query of the Planning Training Manual.

Max Day Green Indicator

Enter the maximum number of flight days for an aircraft to appear in the Seven Day Forecast parameters.

For example, any aircraft this have accumulated 7 or more days of flight time will appear in green. However, any aircraft that has accumulated less than 7 days of flight time will appear in yellow. This number is specified in the Configuration tab of the switch PLNAUTO7D and can be updated at any time.

For additional information, refer to the Seven Day Forecast via the A/C Planning Query of the Planning Training Manual.