MANUALS > Settings > Settings Module > Settings, Update Menu > Company Profile > Company Profile Buttons > TRX Configuration Button, via Company Profile

From the Company Profile window (via Settings/Update) select the TRX Configuration button.

The LHT Configuration button is part of the LHT interface functionality and is only available for customers using this interface. For more information on the LHT interface refer to the LHT Interface (TCS) manual.

Note: Once set up, the interface connection can be tested by selecting the Check Connectivity button in this window.

The information on the left of the LHT Configuration window consists of information linking the Customer to LHT. This information is specific to the Customer and LHT. The following fields must be populated:

_____________________________________________________________________________________

Trax Webserver Address

This is the address for each customers TomCat Server.

Trax Webserver Username

Enter the username, if the system is configured for a username.

Trax Webserver Password

Enter the password, if the system is configured for a password.

Trax System ID

This System ID enables eMRO to identify itself as a system.

Trax Webserver Address

This is the LHT Webserver Address, provided by LHT.

LHT Webserver Username

Enter the LHT Webserver username, if the system is configured for a username.

LHT Webserver Password

Enter the LHT Webserver password, if the system is configured for a password.

LHT System ID

This System ID enables LHT to identify itself as a system.

Document Control Address

This is the default address that documents are sent to.

Customer Code

The customer code as configured by LHT.

Owner

The owner as defined in the Owner Master.

Proxy Address

The address of the proxy server being used to connect to the LHT Interface through a firewall.

Proxy Port

The port number of the proxy server used to access LHT.

Proxy Username

The proxy username.

Proxy Password

The proxy password.

Proxy Whitelist

A server that does not require a proxy setup to overpass a firewall.

Incoming A/C Field Transformation

This field allows users to set up an automatic transformation of the incoming Aircraft naming convention used by a customer to link up with the LHT naming convention. For example, LHT may only accept A/C names to have a hyphen (-) between the aircraft type and series while a customer may not insert a hyphen.

Outgoing A/C Field Transformation

This field allows users to set up an automatic transformation of the outgoing Aircraft naming convention used by a customer to link up with the LHT naming convention (see above).

_____________________________________________________________________________________

To the right of the window all of the available LHT interfaces are listed. Customers are allowed to select the interfaces they wish to use to communicate with LHT. Select the checkbox to the left of each interface to apply its functionality. These interfaces are broken down into four categories as follows:

Exchange Order Material Request Interfaces

The following information/options are available in this window:
_____________________________________________________________________________________

Insert

Sends message to LHT whenever an Exchange Order is created involving an LHT pooled part and an LHT Vendor.

Cancel

Sends message to LHT whenever an LHT Exchange Order is canceled.

Update

Sends message to LHT whenever an LHT Exchange Order is updated.

Status

Allows users to view the current Status of the LHT Exchange Order.

Confirm Receipt

Provides a confirmation indicating that the order was received by LHT.

_____________________________________________________________________________________

Repair Order Material Request Interfaces

The following information/options are available in this window:
_____________________________________________________________________________________

Insert

Sends message to LHT whenever an Repair Order is created involving an LHT pooled part and an LHT Vendor.

Confirm Receipt

Provides a confirmation indicating that the order was received by LHT.

Status

Allows users to view the current Status of the LHT Repair Order.

_____________________________________________________________________________________

Purchase Order Material Request Interfaces

The following information/options are available in this window:
_____________________________________________________________________________________

Insert

Sends message to LHT whenever an Purchase Order is created involving an LHT pooled part and an LHT Vendor.

Cancel

Sends message to LHT whenever an LHT Purchase Order is canceled.

Update

Sends message to LHT whenever an LHT Exchange Order is updated.

Status

Allows users to view the current Status of the LHT Repair Order.

Confirm Receipt

Provides a confirmation indicating that the order was received by LHT.

_____________________________________________________________________________________

Other Interfaces

The following information/options are available in this window:
_____________________________________________________________________________________

CCI

The CCI (Component Change Information) interface sends information to LHT concerning the installation and removal of their components in their customer's aircraft.

Cage Code

Identifies the vendor by Cage Code instead of by Vendor Name.

Part Delivery

Sends exchange issue information.

Document Services

Downloads component documents from LHT.

Airborne (Add Counter)

This interface sends the total A/C Hours for selected aircraft to LHT daily. The Transfer via Airborne checkbox in the A/C Master, Optional 1 tab must be selected for each A/C in order for its A/C Total Hours to be sent to LHT.

For more information refer to the A/C Master, Optional 1 Tab via the Settings Training Manual.

From the Trax Database Jobs window, a daily job hat performs this functionality is listed.

For more information refer to the Trax Database Jobs via the System Administration Training Manuals.

Component Workshop Findings

Downloads reliability information from LHT.

Memo

Enables the sending/receiving of memo's between the customer and LHT.

New A/C

Sends new aircraft notifications to LHT.

Contract Data

Automatically updates the P/N Pool. Automatic updates are sent via the Trax Database Jobs window (see above).

Shipping Report

Downloads shipping documents such as the Airway Bill from LHT.

Interchangeability

Select to view LHT interchangeability.

_____________________________________________________________________________________

Note: All of the above interfaces are selected by default.

Note: Additional interface configuration documentation can be accessed through the eMRO iCentral website. Go to the Online Resources / Technical & Interface page for how-to documentation regarding interface configuration including Application Update, Apache WebServer Update, and Configuration of WebServer (which all require the same basic setup/configuration for the LHT interface as they do for other interfaces). The Technical & Interface page can be found at this address: https://icentral.trax.aero/OnlineResources/TechInterf/Pages/default.aspx.