Share
Print
|
|
|
|
|
TOOLIFR - Default Tool Life at Receiving
Default Tool Life at Receiving
Affected Window: w_po_receiving_eu
Switch Set to Yes:
When set to Yes, the Tool Life EXP field will default according the the number of days being calculated based on the Days set up for the Tool Calibration Flag of the P/N Master when Receiving a Purchase Order or Repair Order.
The following tool is being set up to have a specific amount of Days for the Tool Calibration Flag.
With the switch set to Yes, the Tool Life EXP is defaulted based on the calculation of these days.
Switch Set to No:
When set to No, the Tool Life EXP field will not be defaulted, but instead left at 00/00/0000 for the user to manually enter.
The following tool is being set up to have a specific amount of Days for the Tool Calibration Flag.
With the switch set to No, the Tool Life is not defaulted, but instead remains left at 00/00/0000.
Share
Print
|
©1997-2024 Trax USA Corp. All rights reserved. This manual may not be copied, photocopied, reproduced, translated, or converted to any electronic or machine-readable form, in whole or in part, without prior written approval from Trax USA Corp. |
 |