MANUALS > Receiving > Receiving Switches > PNECPOSCONT - Allow P/N E/Cs with Position Control to be Available in Receiving

PNECPOSCONT - Allow P/N E/Cs with Position Control to be Available in Receiving

Allow P/N E/Cs with Position Control to be Available in Receiving

Affected Window: oux_pn_inventory_ri_eu

Note: This switch should always be set to Yes.

Switch Set to Yes:

When set to Yes, the system will allow P/N E/Cs that have Position Controls to be available in the Receiving Inspection and Order Receiving window, and will give users the ability to update the Reset Date of the E/C. P/N E/Cs with Position Controls will also be available from within the Repair Order Detail window's Control tab.

The following P/N E/C has a Position Control set up.

During Receiving Inspection, notice the P/N E/C is available and the Reset Date can be updated.

Switch Set to No:

When set to No, the system will not allow P/N E/Cs that have Position Controls to be available in Receiving Inspection nor Order Receiving, thus not giving the ability to update the Reset Date of the E/C.

Note: This switch should always remain set to Yes.

The following P/N E/C has a Position Control set up.

During Receiving Inspection, notice the P/N E/C is not available; therefore, the Reset Date cannot be updated.