MANUALS > Engineering > Engineering Module - E/C > Engineering E/C, Update Menu > Engineering Control Shop > Engineering Control Shop Detail

Engineering Control Shop Detail

The Engineering Control Shop (E/C) option allows users to configure the controls and requirements associated with parts within the system. Additional controls are used along with the basic E/C configuration, which are described later.

E/Cs are effective to components (parts). Airworthiness Directive (AD) and Service Bulletin (SB) status can be tracked for aircraft by using E/Cs. Component related P/N E/Cs can be tracked with the additional capability to specify hard time limitations. These items can then appear in Planning Control for scheduling.

Task Card requirements can be linked to the E/C. The Task Cards are then added to the Shop Orders (along with the E/C) in the Shop Module or via the Planning Control application.

When the Task Cards are completed under the Shop Work Order, this then allows the E/C status to be updated (when the Shop Work Order is closed). Compliance records are also written.

The critical items for the control of the E/C are the schedule and the effectivity. There are numerous combinations of ways to configure E/Cs and relative information. Please consider additional support regarding this matter if necessary.

The E/Cs may require authorization. One step authorization or complex authorization processes may be set up. Please refer to the E/C Authorization section for additional information.

The following tabs and buttons are available:

Records can be created/opened from the Engineering Control Shop.