Share
Print
|
|
|
|
|
RESEQTOEND - Re-Sequence Non TraxDoc Items When Updating a TraxDoc T/C
Re-Sequence Non TraxDoc Items When Updating a TraxDoc T/C
Affected Window: w_traxdoc_eu
Set Up:
The following Task Card has been brought into the system through an OEM import process:
This Task Card was created via the following TraxDoc record.
Switch Set to Yes:
When set to Yes, non-TraxDoc items will be resequenced to the end when updating a TraxDoc Task Card.
Item 2 is a non-TraxDoc item:
Item 2 is a non-TraxDoc item:
Run the OEM import:
The Item has been resequenced to the end:
The TraxDoc Item References have also been re-sequenced:
Switch Set to No:
When set to No, non-TraxDoc items will be kept in place.
Item 2 is a non-TraxDoc item:
Item 2 is a non-TraxDoc item:
Run the OEM Import:
The item has been left in it's original location:
Share
Print
|
©1997-2024 Trax USA Corp. All rights reserved. This manual may not be copied, photocopied, reproduced, translated, or converted to any electronic or machine-readable form, in whole or in part, without prior written approval from Trax USA Corp. |
 |