Engineering Module

Engineering Control Print

7.2

Note: The P/N Airworthiness Directives Status Report has been added to eMRO.

7.2

Note: The P/N and S/N field of the P/N Airworthiness Directives Status Report can be used to further specify printing parameters.

7.2

Planning Button, via Engineering Control

Selecting the Planning button Prompts the Planning Query window. This window details the Control, Actual, and Initial Schedules and Planning Information of the associated record. Planning Information displayed in this window is also reflected in Planning Control. For more information, refer to the Planning Control module.

Schedule Override Button, via Engineering Control P/N, General Tab

7.2

A/C - The individual aircraft tail number.

A/C Position - The position of the part on the A/C.

N/H/A P/N - The part’s Next Higher Assembly P/N (if applicable).

N/L/A Position - Next Higher Assembly (NHA) serial number.

Task Card Authorization Management Buttons

7.2

Note: A new Import TC items button has been added to the Task Card Authorization Management ribbon. For more information, refer to Import TC Items Button, via Task Card Authorization Management.

Task Card Express Supervisor Button

7.2

The Task Card Express Supervisor button serves similar purposes as the Task Card Express function. The main difference is that changes can be done on existing T/Cs without having to create a new revision. The tabs and functions of this program are identical to the ones in the Task Card Express button.

Engineering Switches

7.2

Switch AUTORESCHWOCAT

When set to Yes, the system will automatically create a W/O with the W/O Category of an Auto-Reschedule E/C that has been closed via W/O Closing. When set to No, the system will not automatically create a W/O with the W/O Category of an Auto-Reschedule E/C that has been closed via W/O closing.