Share
Print
|
|
|
|
|
AUTOWEIGHT - Update Weight from P/N Master to P/S and P/S to P/N Master
Update Weight from P/N Master to P/S and P/S to P/N Master
Affected Window: w_packing_shipping_detail_eu
When Set to Yes:
When set to Yes, the Weight and Unit (Weight Category) for a part number specified in the P/N Master, Optional tab will cascade down to the Packing and Shipping Detail. If the Weight and or Weight Category is updated in the Packing and Shipping Detail, this information will be updated in the P/N Master, and vice versa.
From the P/N Master, Optional tab, note the Weight and Weight Category of the specified part number.
The part is placed on a Transfer Order and sent for Packing and Shipping. In the Packing and Shipping Detail, the Weight and Weight Category information has cascaded down from the P/N Master.
The Weight and Weight Category for the part has been updated in the Packing and Shipping Detail.
The Weight and Unit (Weight Category) have both been updated in the P/N Master.
When Set to No:
When set to No, the Weight and Unit (Weight Category) details will not cascade from the P/N Master to the Packing and Shipping Detail, or vice versa.
From the P/N Master, Optional tab, note the Weight and Weight Category of the specified part number.
The part is placed on a Transfer Order and sent for Packing and Shipping. In the Packing and Shipping Detail, the Weight and Weight Category information does not cascade down from the P/N Master.
Share
Print
|
©1997-2024 Trax USA Corp. All rights reserved. This manual may not be copied, photocopied, reproduced, translated, or converted to any electronic or machine-readable form, in whole or in part, without prior written approval from Trax USA Corp. |
 |