MANUALS > Technical Records > Technical Records Module > Technical Records, Update Menu > Dent Mapping > Damage Repair Reporting, via Dent Mapping

Damage Repair Reporting, via Dent Mapping

The Damage Repair Reporting window allows the user to enter details information about the dent (e.g. location, size)

The following information/options are available in this window:
_____________________________________________________________________________________

Damage Type

The Damage Type Code. To view/set up these codes, go to Settings/ Explorer/ System Transaction Codes/ Technical Records/ Damage Type.

Location of Damage section

Section (From / To) - The section covering the damage area.

Station (From / To) - The station of the aircraft. This is a physical location on the aircraft in inches from a datum point.

Stringer (From / To) - In aircraft construction, a Stringer (also known as Longeron) is a thin strip of wood or metal, to which the skin of the aircraft is fastened.

Plus - Enter any additional information regarding the station. This is a free text field and is informational only.

Dimensions section

Length / Width / Depth - The dimension (length, width, depth) of the damaged area.

For Replaceable Parts section

P/N Damaged Part - The part number of the damaged part.

S/N Damaged Part - The serial number of the damaged part.

Action Taken section

In Limits radio buttons - Select whether the corrosion is within allowable limits.

Acc (According) - Enter a reference document that the work was completed according to. (e.g. SRN 53-00-0)

Blend Repair radio buttons - Select the Yes radio button if there was any blending done to the repair. Select No if no blending was done to the repair.

Original Thickness - The original thickness of the material before blending.

Blend Out Length - The length of the area the blending was done.

Width - The width of the area the blending was done.

Remaining Thickness - The remaining thickness of the blended area.

Repair Performed radio buttons - Select the Yes radio button if a repair was performed. Select No if a repair was not performed.

Work Performed - Enter the work performed for the aircraft. This is a free text field.

Acc (According) - Enter a reference document that the work was completed according to. (e.g. SRN 53-00-0)

_____________________________________________________________________________________

Once the information has been entered, select the Save button.

Notes and Attachments can be linked to the record by selecting the Notes and Attachments buttons, respectively.