MANUALS > Shop > Shop Module > Shop, Update Menu > Shop W/O > Shop Work Order Detail > W/O Shop Detail Buttons > Task Card Button, via W/O Shop Detail > Shop W/O Task Card, Optional 3 Tab

The Shop W/O Task Card, Optional 3 tab allows the user to add additional information related to the Shop W/O Task Card. This window is accessed via the Shop Work Order Header, via the Task Card button.

The following information/options are available in this window:
_____________________________________________________________________________________

Electrical Power

Select 'Yes' if electrical power is required to perform the Task Card / Non-Routine Task Card, or 'No' if it is not required.

Hydraulic Power

Select 'Yes' is hydraulic power is required to perform the Task Card / Non-Routine Task Card, or 'No' if it is not required.

Air or Ground Mode

This is used to simulate the condition of the aircraft, in flight or on the ground.

Fuel Tanks

This is the condition of the fuel tanks in relation to the amount of fuel capacity.

Cat Rating

The Category Rating as entered through the System Transaction Code Cat Rating via Settings. The CAT Rating is the description of the type of A/C landing system and is informational only.

Flaps Position

The condition of the flaps based on the amount that they have been extended.

Slats

The condition of the slats based on the amount that they have been extended.

Spoilers

The condition of the spoilers based on the amount that they have been extended.

Expenditure

The Expenditure Code related to this Task Card / Non-Routine Task Card. All material issues, labor actuals, and expenses performed against this Task Card / N/R Task Card impacts the selected Expenditure Code account financially. If the Expenditure Code is not captured in the Task Card, the system will search for the Expenditure Code associated to the Engineering Control (E/C) which brought the Task Card / N/R Task Card onto the work package and will default to this Expenditure Code. If the Task Card's / N/R Task Card's associated E/C does not have a defined Expenditure Code, the system will use the W/O Expenditure Code to capture and record all financial impacts. Financial transactions are recorded and available for view via the Journal Interface/ Query/ Journal Entry Query. Expenditure Codes may be created via G/L Interface/Update/Journal Entries Expenditure in the Creating a New Expenditure Code. For more information, please refer to the Creating a New Expenditure Code section of the G/L Interface Manual.

Note: This code is mandatory in the work order. The user will not be able to create the work order without entering an Expenditure Code in the work order.

S.S.I.D. checkbox

Indicates that this is a Supplemental Structural Inspection Detail Card.

Zonal checkbox

Indicates that the word “ZONAL” will be printed on Task Cards / Non-Routine Task Cards.

Mandatory Classification checkbox

Select this checkbox to indicate that this Task Card / Non-Routine Task Card holds a mandatory classification and is required to be accomplished (i.e. cannot be canceled from the Work Order).

N.D.T. checkbox

Indicates that this is a Non-Destructive Testing Task Card.

ET checkbox

Eddy-current testing. When this checkbox is selected, an additional print will be generated along with Task Card / Non-Routine Task Card print. This checkbox only appears when the N.D.T checkbox is selected.

Allow Defer checkbox

Indicates that this card is allowed to be deferred.

RVSM checkbox

Reduced Vertical Separation Minimum. Select this checkbox to reduce the vertical distance between aircraft in the air.

Engineering checkbox

Informational only.

MT checkbox

Magnetic particle testing. When this checkbox is selected, an additional print will be generated along with the Task Card / Non-Routine Task Card print. This checkbox only appears when the N.D.T checkbox is selected.

ECTM checkbox

Engine Trend Condition Monitoring (reliability report).

RII checkbox

Required Inspection Item. Select this checkbox if the item requires inspection. This is informational only.

A/C Jacked

Indicates if an aircraft jacking is needed to perform the Task Card / Non-Routine Task Card.

Structure checkbox

Informational only.

PT checkbox

Penetrant testing. When this checkbox is selected, an additional print will be generated along with the Task Card / Non-Routine Task Card print. This checkbox only appears when the N.D.T checkbox is selected.

CDCCL checkbox

Critical Design Configuration Control Limitation. This is informational only.

Functional Chk checkbox

The Functional Check checkbox is an informational field.

Leak Chk checkbox

The Leak Check checkbox is an informational field.

IR checkbox

Incident Report (injuries, not fatalities). Select this checkbox to report any injuries.

Pneumatic Power checkbox

Select this checkbox to indicate if pneumatic power is needed to perform the Task Card Non-Routine Task Card.

Crack checkbox

Indicates that the W/O Task Card / Non-Routine Task Card is addressing a crack. This checkbox is informational only.

UT checkbox

Ultrasonic Testing. When this checkbox is selected, an additional print will be generated along with the Task Card / Non-Routine Task Card print. This checkbox only appears when the N.D.T checkbox is selected.

ETOPS checkbox

Indicates that the Task Card / Non-Routine Task Card is relevant to ETOPS operations.

T1

Select this radio button to designate the technician as level 1. Level 1 specifies the technician is task trained at the required task.

T2

Select this radio button to designate the technician as level 2. Level 2 specifies the technician is task trained and is certified at the required task.

T3

Select this radio button to designate the technician as level 3. Level 3 specifies the technician is certified and licensed at the required task.

_____________________________________________________________________________________