MANUALS > Production > Production Module > Production, Update Menu > W/O > Work Order Detail > Work Order Detail Buttons > Customer Task Card Button, via Work Order Detail > W/O Customer Task Card, General Tab

The W/O Customer Task Card, General tab allows the user to populate Task Card related information. This tab contains the same fields and functions as the W/O Task Card, General tab.

Note: Task Cards cannot be re-Opened once the associated W/O Engineering Control has been reset. However, Non-Routine Task Cards can be re-opened if the W/O E/C has been reset.

The following information/options are available in this window:
_____________________________________________________________________________________

Paper Copy Required button

This button indicates that information related to this Work Order Task Card / Non-Routine Task Card has been printed and must be processed. For additional information, refer to the Task Card, Optional 2 Tab via the Task Card section of the Engineering - T/C Training Manual.

W/O

The Work Order used to categorize, manage, and schedule work requirements for aircraft maintenance.

A/C

The individual aircraft tail number.

E/C

The Engineering Control that specifies aircraft or component scheduled maintenance intervals.

P/N

The Part Number reference for the aircraft part.

P/N S/N

The Serial Number for the specific serialized part.

Parent E/C

The Parent Engineering Control associated with the E/C. This parent E/C is specified in the E/C which contains the schedule. When the Parent is selected, it will bring in all dependent E/Cs (Child E/Cs) on to the Work Order as required. For more information, please refer to the Engineering Control, Schedule Tab via the Engineering - E/C Training manual.

Task Card

The Task Card / Job Card that details the scheduled maintenance work.

Note: If the Switch TCEFFECT is set to Yes, only task cards that are effective for the aircraft type you are building the Work Order for will be displayed in the help window available. If the switch is set to No, all task cards will be displayed, but only those effective for the aircraft can be attached.

Reference of the Customer T/C

Additional Reference for Customer Task Cards.

Note: This field is managed from the W/O Customer Task Card, Optional 2 Tab.

Revision

The Task Card's most recent authorized revision number.

CAT

The Task Card's Category, as defined in Task Card Category transaction code via the Engineering Transaction Codes. Task Card Authorization Steps are defined in System Transaction Codes by Task Card Category.

Type

The Task Card Type, as defined in the Transaction Code. This code can be used to sort and locate Task Cards.

Description

Brief text describing the Task Card.

Status

The Status of the Task Card. Any Task Cards with Cancel status will not be printed on a Work Order.

Note: Task Cards cannot be re-Opened once the associated W/O Engineering Control has been reset. However, Non-Routine Task Cards can be re-opened if the W/O E/C has been reset.

Status Category

The sub-status of the card (hold/defer reason). (Linked from the T/C Optional tab.)

Work Order Phase

The particular phase of the work flow that this particular card pertains to.

Sort Order

The sort order (printing sequence) of this Task Card / Non-Routine.

By

The employee who worked on the Task Card and therefore triggered one of the following statuses:

• Open
• Cancel
• Closed
• Defer
• Delayed
• Hold
• On Condition

  Note: Even if the By field is greyed out, even if the Task Card has been printed, the user can update the By field by adjusting the status of the Task Card in the W/O Task Card window. The employee who last worked on the Task Card, or modified it will be reflected/updated in the W/O Task Card, General tab. For additional information, refer to the Task Card Work Button, via the Work Order Buttons of the Production Training Manual. This also applies to Shop Task Cards.

MEL/CDL

The MEL/CDL field allows the user to enter the MEL or CDL reference related to the deferral. MEL/CDL may be defined, entered or digitally imported in the MEL Master. For additional information, refer to the MEL Master via the Settings Training Manual.

MEL/CDL CAT

Minimum Equipment List Category that is defined in the associated Defect Report. The MEL number and the MEL category can be associated to one another via the MEL Master. This field is only informational.

Additional Work checkbox

This informational checkbox is selected when the invoiced Task Card (Routine or Non-Routine) was designated as additional work. For this to appear, the Task Card must have the Additional Work checkbox selected. For more information refer to the W/O Task Card, Optional 2 Tab via the Task Card Button of the Production Training Manual.

Open On

The date the Task Card was opened for the W/O.

Open Station

The Station associated with the W/O Task Card opening. Only stations marked as maintenance locations are accepted.

_____________________________________________________________________________________

The Export as Excel button can be selected to view the queried data (including all pages) in an Excel spreadsheet. This Excel file can be saved for later use. For more information refer to the Export as Excel Button via the eMRO System Standards manual.