MANUALS > Shop > Shop Module > Shop, Update Menu > Shop W/O > Shop Work Order Detail > W/O Shop Detail, P/N Information Tab > NLA Installation/Removal Button, via W/O Shop Detail, P/N Information Tab

The NLA Installation/Removal button option can be used to strip and build Next Lower Assemblies (N/L/As) in the system. This is normally used in a workshop situation, but can also be used for other purposes such as engine or landing gear assembly.

The left block on the screen contains items that were issued to the Work Order (items that would be required to be installed on the assembly). The right block is used for the removed parts from the assembly. The bottom section of the screen contains the next level down from the N/H/A P/N S/N specified at the top of the screen. This option can only install/remove one level at a time. If a part is removed that has lower assemblies, the lower assemblies will be removed too.

When accessed from the Shop W/O, P/N Information tab, the N/H/A P/N, N/H/A S/N, and Shop W/O are listed by default.

For more details on the functionality of this window, refer to P/N N/L/A Installation and Removal.