MANUALS > TraxDoc > TraxDoc Module > TraxDoc, Update Menu > TraxDoc Master > TraxDoc Document Detail > TraxDoc Document Detail, TraxDoc Explorer Tab > Generate/Update Data Button, via TraxDoc Document Detail > Load an AMM through TraxDoc, via Aircraft Maintenance Manual (AMM) Doctype > View AMM Effectivity Button, via Task Card Create from AMM

From the Task Card Create from AMM window, select the Effectivity button.

The TraxDoc must be effective to at least one Type/Series (excluding EMM and EIPC TraxDocs).

If the TraxDoc is effective to multiple Type/Series, then the SGML Designator for each Type/Series must be set to the same value.

The TraxDoc Effectivity Selection window appears:

Here the user may view effective aircraft.

Note: This is a view only window.

The TraxDoc must be effective to at least one Type/Series. If effectivity is not established, the following error will appear:

If the TraxDoc is effective to multiple Type/Series, then the SGML Designator for each Type/Series must be set to the same value.