MANUALS > Engineering > Engineering Module - T/C > Engineering - T/C, Update Menu > eMRO Task Card Shop Selection > Task Card Shop > Task Card Shop, Optional 3 Tab

The Task Card, Optional 3 tab allows the user to enter any additional information related to the Task Card.

The following information/options are available in this window:
_____________________________________________________________________________________

Air or Ground Mode

This is used to simulate the condition of the aircraft, in flight or on the ground.

Spoilers

The condition of the spoilers based on the amount that they have been extended.

Fuel Tanks

This is the condition of the fuel tanks in relation to the amount of fuel capacity.

Flaps Position

The condition of the flaps based on the amount that they have been extended.

Expenditure Code

The Expenditure Code related to this Task Card / Non-Routine Task Card. All material issues, labor actuals, and expenses performed against this Task Card / N/R Task Card impacts the selected Expenditure Code account financially. If the Expenditure Code is not captured in the Task Card, the system will search for the Expenditure Code associated to the Engineering Control (E/C) which brought the Task Card / N/R Task Card onto the work package and will default to this Expenditure Code. If the Task Card's / N/R Task Card's associated E/C does not have a defined Expenditure Code, the system will use the W/O Expenditure Code to capture and record all financial impacts.

Note: This code is mandatory in the work order. The user will not be able to create the work order without entering an Expenditure Code in the work order.

Corrosion checkbox

Indicates that this is a Corrosion Card. If this box is checked, the appropriately related field will appear on the Work Order.

S.S.I.D. checkbox

Indicates that this is a Supplemental Structural Inspection Detail Card.

Mandatory Classification checkbox

Select this checkbox to indicate that this Task Card / Non-Routine Task Card holds a mandatory classification and is required to be accomplished (i.e. cannot be canceled from the Work Order).

Pneumatic Power checkbox

Select this checkbox to indicate if pneumatic power is needed to perform the Task Card Non-Routine Task Card.

N.D.T. checkbox

Indicates that this is a Non-Destructive Testing Task Card.

T1 radio button

Select this radio button to designate the technician as level 1. Level 1 specifies the technician is task trained at the required task.

T2 radio button

Select this radio button to designate the technician as level 2. Level 2 specifies the technician is task trained and is certified at the required task.

T3 radio button

Select this radio button to designate the technician as level 3. Level 3 specifies the technician is certified and licensed at the required task.

_____________________________________________________________________________________