MANUALS > Engineering > Engineering Module - T/C > Engineering - T/C, Query Menu > Task Card Query

Task Card Query

The Task Card Query allows users to search for Task Card records and view related information. Users enter search criteria at the top of the window, and the results are displayed in the table to the bottom.

Note: Actual records cannot be edited from the Query window. For more information on creating and updating Task Cards, refer to the Task Card Selection window.

The following information/options are available in this window:
_____________________________________________________________________________________

Task Card

The Task Card / Job Card that details the scheduled maintenance work.

Category

The category of the Task Card to be changed.

Conflict Task Card

If a Task Card is specified here, it indicates that the current Task Card should not be performed should it appear in a Work Order with the specified Task Card.

Zone

The Zone area for the Task Card (selected from Task Card Control Master).

Skill

The Skill of the employee required for this item. Skills are set up via the Skill Master. The Skills listed for Mechanic or Inspector are validated against the Mechanic/Technician checkboxes associated to the specific Skill via the Skill Master, General tab.

P/N

This is the Part Number required. A part number may be specified only one time per Item Number. However, the same part number may be specified on each unique item number if needed.

Corrosion

Indicates that this is a Corrosion Card. If this box is checked, the appropriately related field will appear on the Work Order.

Allow Defer

Indicates that this card is allowed to be deferred.

N/D/T

Indicates that this is a Non-Destructive Testing Task Card.

ETOPS

Indicates that the Task Card / Non-Routine Task Card is relevant to ETOPS operations.

Structure Repair

Select this checkbox to query for Task Cards that apply to structural repairs.

Zonal

Indicates that the word “ZONAL” will be printed on Task Cards / Non-Routine Task Cards.

S/S/I/D

Indicates that this is a Supplemental Structural Inspection Detail Card.

Weight and Balance

Select this checkbox if this Task Card is for a Weight and Balance Check on the aircraft. If selected, the Weight and Balance button appears.

Control

Select from the drop down if the Task Card is to be utilized for P/Ns or A/C. If selecting the A/C Control, select the A/C Type/Series to auto generate the Task Card reference for naming purposes only.

Sub

The Sub is used to auto generate the Task Card reference. This is a free text field used for naming purposes only.

Company

The Company used to auto generate the Task Card reference. This field only appears when G/L Interface Switch COMPANYMULTI is set to Yes. When this field is populated, only those aircraft with the same G/L Company via the A/C Master, Other 1 tab can be made effective to the T/C. Select 'ALL' to query for T/Cs that are not linked to a specific company; select 'ALL COMPANY' to include any T/Cs regardless of their company.

Note: This field defaults to 'ALL COMPANY' in version 5.

Note: For more information, refer to the Multi Company Functionality.

Task Card

The Task Card / Job Card that details the scheduled maintenance work.

Category

The Task Card's Category, as defined in Task Card Category transaction code via the Engineering Transaction Codes. Task Card Authorization Steps are defined in System Transaction Codes by Task Card Category.

Status

The Status of the Task Card.

Revision

The Task Card's most recent authorized revision number.

A/C Type

Select an A/C Type to filter by. The type of aircraft.

A/C Series

Select an A/C Series to filter by. The aircraft series.

Chapter

Select a Chapter to filter by. The ATA Chapter reference.

Section

Select a Section to filter by. The ATA Section reference.

_____________________________________________________________________________________

The Export as Excel button can be selected to view the queried data (including all pages) in an Excel spreadsheet. This Excel file can be saved for later use. For more information refer to the Export as Excel Button via the eMRO System Standards manual.

The Columns button is used to select which columns will appear in the the window's search results/table section. For more information, refer to Columns Button via the eMRO System Standards manual.

The Filter/Sort button is used to alter the search criteria for records associated with the host module and window. For more information, refer to Filter/Sort Button via the eMRO System Standards Module.

The user can look at more information about the selected record by clicking on the Select button.

_____________________________________________________________________________________

Task Card

The Task Card / Job Card that details the scheduled maintenance work.

Control

Select from the drop down if the Task Card is to be utilized for P/Ns or A/C. If selecting the A/C Control, select the A/C Type/Series to auto generate the Task Card reference for naming purposes only.

Sub

The Sub is used to auto generate the Task Card reference. This is a free text field used for naming purposes only.

Company

As part of the Multi-Company functionality, the Aircraft effective to the original Task Card are not copied over to the new Task Card if the new Task Card has a different Company. Only the aircraft associated to the Company of the new Task Card will be effective to that Task Card.

Note: For more information, refer to the Multi Company Functionality.

Type

The Task Card Type, as defined in the Transaction Code. This code can be used to sort and locate Task Cards.

Category

The Task Card's Category, as defined in Task Card Category transaction code via the Engineering Transaction Codes. Task Card Authorization Steps are defined in System Transaction Codes by Task Card Category.

Task Card Description

The description of the Task Card.

Status

The current status of the Task Card. The status of the Task Card is helpful in determining the stage the Task Card is at with regard to it's completion. Ultimately, the completion of the Task Cards will result in the closing of the Work Order.

Revision

The Task Card's most recent authorized revision number.

Revised By

The user that revised the Task Card.

Revised Date

The Date that the card was revised.

Chapter

The ATA Chapter related to the Non-Routine Task Card. The ATA Chapter auto-populates with the ATA Chapter used to create a Defect Report when a defect is added to an already existing Work Order.

Section

The ATA Chapter Section related to the Non-Routine Task Card. The ATA Section auto-populates with the ATA Section used to create a Defect Report when a defect is added to an already existing Work Order.

Paragraph

The ATA Chapter/Section Paragraph related to the Non-Routine Task Card.

_____________________________________________________________________________________