MANUALS > Engineering > Engineering Module - T/C > Engineering - T/C, Update Menu > Task Card Control Master > Attaching a Task Card Zone to a Work Order

Attaching a Task Card Zone to a Work Order

Create a Task Card or find an existing one. In the Task Card, General tab, scroll down to the Zones section. Select the New button and use the Zone drop down selection menu to select a zone.

Note: Zones can only be attached to Task Cards with the same A/C Type/Series effectivity.

Select the Save button; the zone is saved as shown below:

Create a Work Order for an A/C that has the same effectivity as the Task Card and zone.

Select the Task Card button and the W/O Task Card window appears; select the New button.

Attach the Task Card that the zone is linked to and save the record. The Task Card and associated zone have been added to the W/O.

Note: Although a Task Card can be attached to any W/O, if the zone associated to the Task Card is not effective to the A/C Type/Series defined in the W/O, the zone will not follow the Task Card.