|
MANUALS > Technical Records > Technical Records Switches > MELCHNG - Allow Schedule Change Of A Set MEL/CDL and GMM
MELCHNG - Allow Schedule Change Of A Set MEL/CDL and GMM
Allow Schedule Change Of A Set MEL/CDL and GMM
Affected Window: w_defect_reports_eu
Switch Set to Yes:
When set to Yes, the user will be allowed to override the MEL/CDL and GMM schedule for Defects that have been deferred by an MEL/CDL or a GMM.
The following Defect has been created and has been deferred by an MEL. Note the schedule of the MEL.
The user is able to override the MEL schedule and save the record.
Switch Set to No:
When set to No, the user will not be allowed to override the MEL/CDL and GMM schedule for a Defects that have been deferred by an MEL/CDL or a GMM.
The following Defect has been created and has been deferred by an MEL. Note the schedule of the MEL.
The user attempts to change the MEL schedule days.
The schedule is reverted back to the original scheduled days.
|
See Also Technical Records Switches AC/SCHED - A/C Schedule Flight Daily Option ACAOG - A/Cs that are Out of Service due to Defects will be marked as AOG in A/C Controller Panel, A/C Out of Service Summary window ACAPPROACHDEFECT - Use Defect Number Rather than Flight Log for A/C Approach Survey ACAPPROACHDFMAND - Make Defect and Item Mandatory When Creating New A/C Approach Survey Entry ACAPSUAMD - Make the A/C Approach Survey Airport field Mandatory ACAPSUCATMD - Make the A/C Approach Survey Category field Mandatory ACAPSUFLMD - Make the A/C Approach Survey Flight Log field Mandatory ACAPSVDD - Limit Number of A/C Actual Flight Displayed in the A/C Approach Survey Drop Down ACCKNLAEFF - Validate NLA to A/C Effectivity ACCLOSE - This is an Auto-Set switch - DO NOT CHANGE MANUALLY! ACCOMPOMULTI - Allow Selection of Multiple Aircraft in A/C Component Print ACCPQEAUTOFILL - A/C Controller Panel Quick Entry Auto-Populated Fields ACCPQREMINDER - Turn ON/OFF Reminder Pop-Ups in A/C Controller Panel Query ACCPRR - Turn ON/OFF Reminder Pop-Ups in A/C Controller Panel Query ACEXPSOFT - Show Missing Component of Software ACFLIGHTST - A/C Flights at the Same Time ACFLTCLS - A/C Auto Flight Closing ACFLTTIM - A/C Auto Flight Log Upload ACHISTORYREPORT - Add Flight Number, A/C Hours and A/C Cycles To A/C History Report ACMSLOG - Validate New Defect Reports Against Existing A/C Log Books ACOUTSRVCWOMSG - A/C Out of Service from W/O ACOUTSRVTP - A/C Out of Service Type Mandatory ACPERFCT - A/C Perfect Mask Verification Mandatory ACPINSRMV - Include Validation of Perfect Mask At Install/Remove Transaction ACPMENSP - A/C Perfect Mask Exclude None Setup Position ACPNDTBK - Set A/C P/N Transaction Date/Time fields to Null ACPNEDIT - Edit Control at A/C P/N Transaction at Save ACPNEDITROT - Immediate Hard Warning When Attempting to Install Non-Serialized Part ACPNIMPORTDETAIL - A/C Initial Template Load And P/N N/L/A Creation Import Will Allow to Import Up to Five Unique P/N Controls Per P/N ACPNLASTRMV - P/N Last Removed Validation ACPNSTA - Station field Mandatory for A/C P/N Transaction ACPNTRANSPKG - A/C P/N Transactions Run Through a Package ACPNTRNT - A/C P/N Transaction Time Auto Populate ACPNTRSQ - A/C P/N Transaction History Next Sequence Number ACPNTRSNDD - Deactivate S/N and Batch Menu from A/C P/N Transaction ACTBLKOP - Allow Block Times to be Left Blank Without Being Computed ACTRLTRAN - Control Time of Transactions in A/C Controller Panel ACTRLWOPN - Only Show Open Work Orders on the Controller Panel ACTRLWO72 - Filter for Work Orders In A/C Controller Panel window ACTRLWOTD - Only Show Work Orders Scheduled for Today on the A/C Controller Panel ACUNITSFLIGHT - Enables Process for Updating A/C Units and Resolved After Flight field on Defect Resolution is Available ACUNITSMAND - Make the Units fields in the A/C Actual Flights, A/C Units tab Mandatory ACUNITSREQ - Prompt for Required A/C Units When Saving a Defect Report ALLSNFORPN - Search all engines and Consider Proration Configuration & History ALTFLTLOG - Allow Alternate Format For AC FLIGHTS LOAD FROM FLIGHT OPS APDDSKILL - Auto Populate Skill On Defer Tab Of Defect APSETDAP - Make AP Field Set to Dual AP APUHRVALIDATION - P/N APU Reading Operation Hours Validated Against the Config Number APUREAD - APU Reading Time Control Definition ASBLYCHK - Validate Complete Assembly Before A/C Install ASCMAND - Defect Report ASC (field) Mandatory ATCONPNL - Show Deferred Defected in A/C Controller Panel AUTDATEDEF - Auto Populate the Reported Date, and Time, and Resolved Date and Time fields for Defects AUTOINS - Check the Auto Install Process AUTOIR - Auto Install/Remove At Issue/Return To Stock AUTONAMEDEF - Auto Populate Reported By When Wall Password Entered AUTOSHPNLA - Created Auto Shop W/O At P/N N/L/A Removal BLKCONSAVE - Concession Read-Only After Save, Must Use Update Concession Button CHATGPT - Enable the ChatGPT Smart Query Button CLDFXFER - Close Defect Report when transferred to a W/O Non-Routine Task Card CLMDDRDT - Close Related MDDRs By Reported Date <= To Reported Date Of Closed Defect COMMONMDDR - Select Which Defects To Close With Common MDDRs CONCESSN - Concession Automatically Number, Next Sequence Number CONRCTMD - Make Concession Reason Category and Reason fields Mandatory CONTERM - Automatically Select Terminate Immediately Checkbox CORRMETA1 - Corrosion Meta Data Field 1 Available in N/R Express, Damage Tab CORRMETA2 - Corrosion Meta Data Field 2 Available in N/R Express, Damage Tab CORRMETA3 - Corrosion Meta Data Field 3 Available in N/R Express, Damage Tab CORRMETA4 - Corrosion Meta Data Field 4 Available in N/R Express, Damage Tab eMRO CPCPMANDEF - CPCP Mandatory Fields on Defect Report CPCPVALIDTRANCODE - Filter Section, Station, and Stringer Transaction Codes by A/C CPYINSRVDT - Copy W/O Completion Date to the Estimated In Service Date in A/C Out Of Service CTPNLNRTCWO - Attach Open Defect to a W/O even if already attached to another Completed W/O CTPNLPEND - Manually place A/C Flight Status back to 'In Service' DACOSERVP - Default A/C Out of Service to Pending If Open DACOUTSERV - Default Flight Status (radio button) to In Service/Out of Service DEFALERT - Defect Alert Notification for Defect Report DEFCTDUE - Display Defect Due Date in Defect Report DEFDFDTFLT - Default Defer Date/Time from the Flight Number DEFDESCTOCREG - Auto Populate Reason for Concession Registry from Defect Report Description DEFDESMD - Make Defect Report Description and Resolution Description fields Mandatory DEFDUP - Defect / Defect Type Combination Error DEFECTAU - Defect Report Automatically Number, Next Sequential Number DEFECTDEFAULTSORT - Set Default Sort For Defect Reports DEFECTDEFERCATEGORY - Disable Defer Category Field Via Defect Report DEFECTORWO - W/O and T/C Mandatory for A/C P/N Transactio DEFERCAT - Make Defer Category field Mandatory DEFERDATE - Auto populate Defer Date and Time DEFERMAND - Defer Field Mandatory in Defect Report Quick Entry DEFERSCHEDULEREQ - Deferral Repeat Schedule Required when Repeat Number Greater Than One DEFERWO - Allow Defect Type WO/DEFER''s Defect and Item to be Entered By User DEFITEMLIM - Restrict the Item field in Defect Reports DEFOPTMAND - Make CI (Critical Task), ETOPS, and CDCCL Radio Buttons Mandatory DEFPILOT - Defect Report Make Defect Type Default DEFPNAVAIL - Required Availability In Central Location To Apply Concession DEFPNLOC - Defect Report will show available parts in Current and/or Main Warehouse DEFPNSNREMNOT - Notify When P/N S/N Associated With Open Defect And P/N Is About To Be Removed DEFREPCATMAND - Make Category Field Mandatory In Troubleshooting Tab DEFREPMEL - Defect Repeat MEL Soft Warning DEFRLSTA - Defect Report Make Resolution Station (field) Mandatory DEFRPSCH - Defect Report Repeat Schedule DEFRSLCAT - Make Resolution Category field for Defect Report Mandatory DEFSCMAN - Defect Report Make Section (field) Mandatory DEFSKILLVAL - Make the Defect Report Resolution Employee Validate Skill DEFSTATIONWARN - Soft Warning for Defect with Invalid Station DEF_REF - Defect Report Generate Reference Number Button DELAYADDFIELDS - Make Additional Fields in Defect Delay window Visible DELSCHED - Delete Scheduled Flights by Days Specified in Config Other Field DFCAPAREA - Capability Area for E/Cs, PN Controls and Defects Listed in Config Other DFCMFFLT - Defect Report Automatically Select Fault Confirm (radio button) DFITDUP - Validate the Defect Type and Defect Item Combination DFPOSMDTRY - Make Defect Report Position Mandatory DFPOSMDTRYDEFER - Make Position Field Mandatory when a Defect is being Deferred DFSCPREMVL - Auto populate the Removal Text from the corresponding reason DFTITMDEFT - Defect Report Item Default DISABLEPC - Disable Planning Query and W/O Closing During A/C Flights Closing DMELDSC - Defect Report Description from MEL Description DMGSTR - Make the From Stringer, To Stringer and Plus field Mandatory DONTACCUNAACTUAL - Do Not Accumulate Actuals When Engineering Effectivity Status is N/A DRMANDCAT - Make Defect Category Mandatory in Defect Report DRMANPHASE - Make Phase field Mandatory in Defect Report DRMELWINDOW - Do not display MEL window every time data is saved DSPNTFR - Dispatcher Notified field Mandatory on the Defer/Resolution Tab ETOPSWARNSUPPRESS - Suppress Warning Message When Installing ETOPS P/N On Non ETOPS A/C FAAWEB - Set the Config Other field to Take the User to the FAA Website upon SDR Creation FLIGHTLOGMAND - Make Flight Log and Leg fields Mandatory FLIGHTMD - Make Flight field Mandatory for a PILOT Defect Type in a Defect Report FLTEDT - Flight Edit Warning for Arrival, Departure, and Days Control FURNAMEDATE - Change FUR Naming Convention and Initial Date to Default to Defer Date IN/RVMAD - Make Install/Removal Reason Code Mandatory for A/C P/N Transactions INFLTTRA - Check for A/C Flight in A/C P/N Transaction INSREMPNSWCONF - Copy Associated PN Software Configuration from Removed P/N to Installed P/N IRFUACPNTWTCAD - Include Retrospective Flight Updates For A/C P/N Transactions LCKGENDEF - Protect Certain Fields In The General Tab LCKGENRES - Protect Certain Fields in the General Tab of Defect Reports LCKPNCTAUTH - Lock the P/N Control When P/N is Installed on A/C LIMEMULTEXT - Show Linked or Called On text for each MEL LIMETYED - Linked MEL Defect Type Editable LOCKDEFFIELDS - Lock the Defer To Schedule fields for Deferred Defects with a Concession LOPNREMVNOTF - Include Extra Information in the LO P/N Removal Notification MANBBRIIRES - Make Buy Back or RII Mandatory On Resolution And Troubleshooting Tab MANDATRII - Make RII Field Mandatory MANDELAYFLDS - Make Delay Date, Delay Control, Cancellation, and Delay Code Fields Mandatory MANDINSP - Make Inspected By field Mandatory When Resolution CAT field is Populated MANDRDTIME - Defect Report Reported Time and Deferred Time Mandatory MANDRSTM - Make Resolved Time Mandatory MANDTSTM - Make Trouble Shooting Time Mandatory MAXREQINSMAN - Set A Maximum Number Of Skilled Workers In Configuration Tab MDDR - MDDR Field Mandatory MDDRAUTO - MDDR Auto Number Creation, Next Sequence Number MDDRDEFAULTDEFECT - Default Defect Number and Item as MDDR MDDRDUPL - Check for Duplicate MDDR Entries MDDRINNEWITEM - Automatically populate MDDR when creating a New Defect Report Item MDDRVSBL - Generate the MDDR number only after the defect has been authorized MDSKMNHR - Make Skill, Man Hours, and Men Required fields Mandatory in Defect Report MELMANDT - Make MEL/CDL Field Mandatory MELNOBLK - Disable MEL/CDL/GMM Category MELVEFMN - Validate Existing MEL/CDL/GMM MISSDRDFLT - Default MIS and SDR For Defect Called On MEL MOCTODSRP - Auto Populate MEL and Defect Description in Defect Report MTCDEFSITE - Default Site for New W/O in MTC Opportunities Window MTCMINGTR - Minimum GTR Setting for MTC Opportunities Window MTCOPPDAYS - Limit the Number of Days Displayed in the MTC Opportunities Window NADEPNETOPSAC - Prevent Installation of NAFE Part On ETOPS A/C NHAMANDATO - N/H/A P/N and S/N fields Mandatory when Initial Loading an N/L/A NLA/LOC - N/L/A Remove/Install, Protect Location NLAASSERV - Removed N/L/A made Serviceable in P/N N/L/A Installation and Removal Window NLAINTRMVRB - NLA Selection Installation Deactivated NLAPERF - NLA Perfect Control OILCONSCAL - Control Oil Consumption Notification Alerts OOSNTFY - Add an acceptance step to the Out Of Service Process PCPEATHS - P/N Control / P/N E/C Authorization Steps Only PNCASWOVERR - Active Soft Warning when Override on P/N Control Authorization PNCTLTDL - P/N Control To Display Limits PNCTRLRESET - Disable Cascade P/N Control Reset Date From NHA To All NLAs When Updating P/N Control PNINSTDELETE- Remove Installed Parts from Inventory PNISSUEACMAND - P/N Issued to one Aircraft Cannot be Installed on Another Aircraft PNRMVEFF - Effectivity Removed for One Way Forward Interchangeable From Part PNRMVTUP - Update P/N Total Times After Removal PNWOISSUEACMAND - P/N Issued to W/O Cannot be Installed for another W/O QAAUTHREQ - Validate QA Authorizer READIEI - READI Exclusion Indicator REFSEQNUMQUICKF - Reference Sequence Number visible in the A/C Controller Find/Quick Entry RELIACHB - Makes Reliability Checkbox Visible in Defect Report REMREASO - Removal Reason (Text) Mandatory REMSERVCHK - Select Remove as Serviceable checkbox and Print Removal Tag REPINTDEFVALID - Validates Repeat Interval Reset Steps in Defect Reports REPRINTFONE - Re-Print the Form-1 Report at Removal Transaction REQCONAUTH - Required Concession Authorization REQINSMAN - Auto populate Inspector Man Hours in Defect Report RESLOGMDTRY - Make Resolved Log/Item fields Mandatory REVUNS - In Remove Only, Print P/N Identification Tag RFSQNODP - Defect Report Show Sequence and Previous Sequence Numbers RFSQNOMN - Defect Report Make Reference Sequence Number Mandatory RMVRTSNT - Part Removal Auto Return to Stock as Unserviceable ROUTECHK - Flight Entry Route Check RSLTNDESRP - Make Resolution fields Mandatory if Resolution Description is Entered RSNQUICKFMAN - Reference Sequence Number Mandatory in A/C Controller Find/Quick Entry SDR - Defect Report Make SDR (field) Mandatory SDRSETUP - SDR Unique Sequential Control Number SHFLTTRN - Time On Ground Before Crew Turn Over SHOWLINKDEFCREATED - Display change to Linked MEL Defect Type STATUSTROUBLE - Default Status Ongoing and Cannot Be Changed SWAPCOMP - Swap Companies Without Fixed Assets TCDEFDUE - Defer Item, Use Reported Date Instead of Defer Date TECHONLY - Technical Records Only TERMPNCTRLCON - Terminate P/N Control Concession During Receiving and P/N Control Reset TO2RMVPN - Transfer Owner field to Removed P/N on A/C Remove Install TO2RMVPNMANAGED - Do Not Transfer Owner of a Managed Part TRAKEEPCREBY - Update Modified By and Date fields if Transaction is Completed by Another User UPDTDFRP - Do not allow multiple users to update a Defect Report at the same time UPDTSKILLPNREQ - Update NRTC with Defect's Skill, Man Hours, Men Required and P/N Requirements URACCPOOS - Unlock Reason Code Available in A/C Out of Service Window VALGRINDTIME - Validates If A/C Is On Ground When Defects and Delays are Reported VALLSN - Shows All Serial Numbers Regardless of Being Issued WOPNECDEL - Automatic Deletion of P/N E/C and Controls from W/O Upon P/N Removal |
|
Share
Print
