MANUALS > Production > Production Module > Production, Update Menu > W/O > Work Order Detail > Work Order Detail Buttons > E/C Button, via Work Order Detail > Effect of W/O T/C Status Update on W/O E/C

When an E/C is linked to a W/O, thus creating a W/O T/C, the Status and Function of the E/C can be changed due to the Status of the W/O Task Card being changed. However, compliance of the E/C is still dependent on the closing of the Work Order as a whole, unless the Daily checkbox is selected in the W/O Engineering Control window.

Note: The change of the Work Order Task Card only takes effect on the E/C when the change is conducted on the last Task Card of the E/C.

The Status of the Task Card is changed during the work, as seen in the W/O Task Card window, opened by selecting the Task Card after selecting the T/C Work button, seen below:

In turn, changing the Status of the W/O Task Card can have an effect on the Status and Function of the W/O E/C, which can be seen below:

Changing the W/O Task Cards to specified Statuses has the following effects:

Note: When transferring the Task Card to a different Work Order, the Status and the Function of the E/C remain the same on the new Work Order. For more information, refer to the Transfer E/C button, via W/O Engineering Control.